Tian Liang and scissor lift works hanging plate
Day scissor lift beams installed in the beam frame body at the top of the gondola to withstand the weight of the crane and material weight is the main component of the force, scissor lift sections determined by the design calculations. Estimates by the experience, when the load is 1OKG scissor lift when the lift beam can be used two days of the 14th channel, welded together back to back. Which is equipped with a fixed rope pulley and the end of the pin.
Scissor lift plate material is loaded and running up and down along the rail component. The steel welding system, generally by bracket, chassis frame, tie rods, beams, oblique rod, the vertical rod and other components. Shop floor scissor lift of 50mm wood, steel should be used when non-slip design. The height of the lift plate on both sides should not be less than 1m barrier or block network, feeding and discharge sides should set up protective door. More than 30m high scissor lift, closed form should be made four weeks.
Information from: http://www.liftramp.com/